Specifications

Operation while Dialing Busy Extension
Operation while dialing busy extension
DESCRIPTION
Many functions of AV Series products should be coordinated with System Program
setting, so please contact your SYSCOM representative for a suitable Program.
3.5.1 Internal Automatic Recall
While calling an extension and hearing busy Tone, you may use the function “Internal
Automatic Recall”.
◎
Leave-message: coordinated with system program in Zone 500, 501.
Note:
1. The “MSG” LED of the “Extension with message” (Receiver) will flash; at that time,
LCD phones will display the message information.
2. After finishing leaving message, system will Automatically Recall the Caller’s Ext. and
remind the Receiver’s Ext. as soon as the receiver’s Ext. has released the line.
3. Leaving-message has different grades (refer to system program in Zone 504-ST-IP=3).
It only can takes effect from the superior level to the subordinate level or between
equivalent levels.
◎
Answering the leave-message
3.5.2 Trunk Queuing
While accessing a trunk and hearing busy tone, you may use the function of
“
Trunk
Queuing
”
.
System will call the extension which has queued the trunk as soon as the queued trunk
becomes idle; at that time, the extension can use this trunk line by Off-Hook.
Call an Ext.
Receiver’s Ext.
Bus
y
/No Answe
r
Finished Leaving Message
Receiver’s Ext.
MSG LED Flash
Call back the Caller’s Ext.
Off Hook
Hunt CO
Finished Trunk Queuing
Hearing
Busy Tone