User Guide

Ch5 Settings | 63
5.1 Search Channel ( )
You can set the antenna's properties and search channel.
z
Antenna Setting:
Sets the Antenna
properties.
z
Automatic Search:
Searches the
satellite automatically.
z
Manual Search:
Searches the
channel manually.
z
Advanced Search:
Finds the specific
channel.
z
System Setup :
Sets Antenna angle.
: The menu isn’t provided to TV2 viewer according to the default value. If TV1
viewer selects Search to ‘Enable’ at the Setup-TV2 Control menu,
TV2 viewer can search the
channels. Refer to Chapter 5.3.8 TV2 Control for more information.
5.1.1 Antenna Setting ( )
You can set the antenna's properties such as satellite, tuner, transponder, LNB, DiSEqC, and etc.
①
Move to the Search Channel menu using the “
◀▶
” button, and press the “OK” button.
②
!
Move to the Antenna Setting sub-menu using the “
▲▼
” button, and press the “OK” button.
!
③
Enter your password using the
“
0~9
”
buttons. The default password is 0000.
z
Tuner :
1, 2,/Loop/ twin
z
LNB Power :
On, Off
z
22kHz :
On, Off
z
DiSEqC :
None, 1.0, 1.1
1. Select the Satellite name using the “
◀▶
” button.
2. Show the tuner value according to the tuner type at the Search Channel-System setup menu. (1,
2 for T1/T2, Loop for Loop, or Twin for Twin)