User Guide

54 | AF-9400PV2R Users’ Manual
3. Set the Mode to ‘Record’ using the “
◀▶
” button, and then set the Cycle, Time, and Duration.
4. Whenever you press the “MENU” button after completing setup, the following message will
appear. Move cursor to the “OK” button and press the “OK” button to save the changes.
4.14.4 Recorded File Playback
You can play the recorded file by selecting a desired file. But you can’t play the recorded files on
TV1 and TV2 simultaneously.
1. Press the “PVR” button to display the file list. Or press the “OK” button during the playback.
2. Select the desired file to playback using the “
▲▼
” button, and then press the “OK” button.
z
◀▶
: Switches between the recorded files and
the MP3 files. Refer to Chapter 4.14.5 MP3 File
Playback.
z
INFO
: Shows the specified file with divided into 12
parts.
z
Red
: Locks/unlocks the specified file.
z
Green
: Deletes the specified file.
z
Yellow
: Renames the specified file.
z
Blue
: Shows the Options(Sorts the files, creates
folder, and moves file to some folder) .
z
: Previews the recorded file on the PIP
screen during watching TV at once.
z
: Descrambles the scrambled file.
z ‘1’ means the file was recorded by TV1
viewer and ‘2’ means the file was recorded
by TV2 viewer.
z If you are TV1 viewer, you can playback all
files in ‘1’ and ‘2’. But if you are TV2 viewer,
you can playback the files in only ‘2’.
z If TV1 viewer selects PlayTV1Files to
‘Enable’ at the Setup-TV2 Control menu,
TV2 viewer can playback all files in ‘1’ and
‘
2
’.