User Guide

14 | AF-9400PVR Users’ Manual
To show the PIP channel list.
Repeat ( )
Whenever you press the button, the repeat mode
changes sequentially such as a specified block
repeat→all block repeat→ the repeat mode Off.
Swapping PIP and Main Screen ( )
To swap between the PIP screen and the Main
screen.
Cutting Data ( )
Changing the Position of the PIP ( )
To cut the desired section from the recorded file.
To change the position of the PIP screen.
Bookmark ( )
Switching Rooms ( )
To add or delete the current position as a bookmark.
Up to 64 bookmarks for one recorded file can be
set up.
To switch rooms between the TV1 and the TV2.
Whenever you press the button, you can watch the
other room’s program and exchange the various
configuration of TV such as Favorite channel, Lock,
Language, and etc. At the other room, they can
also watch your program.
Changing the Position of the Bookmark
(
)
To go to the next bookmark position.
Watching the Other Room (RC1: ,
RC2:
)
Showing and changing the Size of the
PIP (
)
Whenever you press the button, you can watch the
other room’s(TV1 or TV2) program.
Whenever you press the button, the Picture in
Picture(PIP) mode changes sequentially such as
showing the PIP on the screen→changing the size
of the PIP screen→the PIP mode Off.
MESSAGE ( )
Users can choose and send a short message from
the list for a simple dialogue
Showing the PIP List ( )
: How to use of 2
nd
RF battery
2
nd
RF remote control is supplied two battery and RF module. You can show these under the RF
receiver unit. You should open the cover under the RFreceiver. One is battery only, the other is
battery unit. You must use the battery unit and only battery is have to charge over 8H (Actually all of
battery are have to charge before using)
: Angle of remote control use
The IR remote control can be used at a distance of up to 7 to 10
meters, and at an angle of 30 degrees from the remote control led.
The RF remote control(hereafter RC2) can be used at Maximum
30meters distance from the RF receiver.