User manual

3.8 Boot Menu:
All the possible devices that you can boot from are automatically detected and listed on the page.
The first device listed is the first boot device. In the example shown below, the Floppy Drive is the first
boot device, followed by the Maxtor 6L100P0-(PM) hard drive and COMBO COB-1H4816-(PS) CD rom.
Phoenix TrustedCore(tm) Setup Utility
Main Advanced Security Power Boot Server Exit
Item Specific Help
Boot priority order:
1: Legacy Floppy Drives
2: IDE 0: Maxtor 6L100P0-(PM)
3: IDE CD: COMBO COB-1H4816-(PS)
4:
5:
6:
7:
8:
Excluded from boot order:
: PCI BEV: MBA v8.2.5 Slot 0420
: PCI BEV: MBA v8.2.5 Slot 0421
: ALL USB KEY
: All USB Floppy
: All USB HDD
: All PCI SCSI
: Legacy Network Card
Keys used to view or
configure devices:
Up and Down arrows
select a device.
<+> and <-> moves
the device up or down.
<f> and <r> specifies
the device fixed or
removable.
<x> exclude or include
the device to boot.
<Shift + 1> enables or
disables a device.
<1 - 4> Loads default
boot sequence.
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
←→ Select Menu Enter Select ► Sub-Menu F10 Save and Exit
51