User manual

3.5.4 Console Redirection Sub-Menu
The Console Redirection sub-menu looks like the following:
Phoenix TrustedCore(tm) Setup Utility
Advanced
Console Redirection Item Specific Help
Com Port Address [Disabled]
Baud Rate [19.2K]
Console Type [vt100]
Flow Control [None]
Console connection: [Direct]
Continue C.R. after POST: [Off]
If enabled, it will
use a port on the
motherboard.
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
←→ Select Menu Enter Select ► Sub-Menu F10 Save and Exit
The following table shows the items that you can customize on the Console Redirection sub-menu page:
Item Options Description
Com Port Address Disabled
On-board COM A
On-board COM B
If enabled, it will use a port on
the motherboard.
Baud Rate 300
1200
2400
9600
19.2K
38.4K
57.6K
115.2K
Enables the specified baud
rate.
Console Type vt100
vt100 8bit
ANSI 7bit
ANSI
vt100 plus
UTF8
ASCII
Enables the specified console
type.
Flow Control None
XON/XOFF
CTS/RTS
Enables Flow Control
Console connection Direct
Via modem
Indicate whether the console
is connected directly to the
system or a modem is used to
connect.
Continue C.R. after POST Off
On
Enables Console Redirection
after OS has loaded.
48