User manual

3.5.3 I/O Device Configuration Sub-Menu
The I/O Device Configuration sub-menu looks like the following:
Phoenix TrustedCore(tm) Setup Utility
Advanced
I/O Device Configuration Item Specific Help
Serial port A: [Auto]
Serial port B: [Auto]
Floppy disk controller: [Enabled]
USB BIOS Legacy Support: [Enabled]
Configure serial port A
using options:
[Disabled]
No configuration
[Enabled]
User configuration
(OS Controlled)
Displayed when
controlled by OS
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
Esc Exit
←→ Select Menu Enter Select ► Sub-Menu F10 Save and Exit
The table below is a list of items that you can customize on the I/O Device Configuration sub-menu.
Item Options Description
Serial port A Disabled
Enabled
AUTO
Disabled - No configuration
Enabled - User configuration
Auto - BIOS or OS chooses configuration
(OS Controlled) Displayed when
controlled by OS
Serial port B Disabled
Enabled
AUTO
Disabled - No configuration
Enabled - User configuration
Auto - BIOS or OS chooses configuration
(OS Controlled) Displayed when
controlled by OS
Floppy disk controller Disabled
Enabled
AUTO
Enable or disable onboard legacy floppy
diskette controller.
NOTE:
IF disabled is chosen please set main
menu legacy diskettes to disabled. IF not
done and an add-in removable device is
used, it will not be assigned drive number
0 (or a:).
USB BIOS Legacy
Support
Disabled
Enabled
Enables or Disables support for USB
Keyboards and Mice.
(Enable for use with a non-USB aware
Operating System such as DOS or UNIX)
47