User manual

3.5.1 Chipset Configuration Sub-Menu

The Chipset Configuration sub-menu is shown in following figure:

Phoenix TrustedCore(tm) Setup Utility

Advanced

Chipset Configuration Item Specific Help

ACPI SRAT Table [Enabled]

DRAM Bank Interleave [Disabled]

Node Interleave [Disabled]

Enable ACPI 2.0 static

resources affinity

table for ccNUMA

systems

NOTE:

This cannot be enabled

if node interleave is

also enabled. Table

will not be created if

node interleave is

enabled.

F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults

Esc Exit

←→ Select Menu Enter Select ► Sub-Menu F10 Save and Exit

The following table shows the items that you can customize on the Chipset Configuration sub-menu page:

Item Options Description

ACPI SRAT Table Disabled

Enabled

Enable ACPI 2.0 static

resources affinity table for

ccNUMA systems

NOTE:

This cannot be enabled if

node interleave is also

enabled. Table will not be

created if node interleave is

enabled.

DRAM Bank Interleave Disabled

AUTO

Interleave memory blocks

across the DRAM chip

selects. Auto will set this

enabled when possible.

Node Interleave Disabled

AUTO

Interleave memory blocks

across nodes. Auto will set

this enabled when possible.