User manual

1.4 Motherboard Specification

Processors

 Dual socket F (1207)

 Side-by-side placement

 Support up to two AMD Opteron 2000 series processors with 68/95/120 Wattage

 Support dual core Opteron processor

 Support 2000MT/s HyperTransport

Chipsets

 ServerWorks HT2000

 ServerWorks HT1000

 HT2000 supports PCI-E and PCI-X slots

 National Semiconductor Super I/O PC87417 chip

 Analog Devices ADM1026 Hardware Monitor chip

Memory

 8x 240-pin 1.8-Volt DDR2 DIMM sockets

 DIMM sockets voltage from 12V

 Dual channel memory bus

 Four-way interleaved memory banks (pair of DIMMs required)

 Support DDR2-667/533/400 memory

 Support Registered ECC type memory modules only

 Support up to 32GB

 Support Chipkill, Parity, On-line spare

BIOS

 4Mb Phoenix BIOS

 Legacy USB support

 MP 1.1 & 1.4 compliant

 SMBIOS 2.3.3 and DMI 2.0 compliant

 Soft Power-down

 Multiple boot support (with BIOS Boot Specification v3.1 (BBS) support)

Expansion Slots

 2 x PCI-E x8 slots

 Connected to HT2000

 1 x PCI-E x1 slot

 Connected to HT2000

 2 x PCI-X 133/100MHz slots

 Connected to HT2000

Integrated Gigabit Ethernet

 ServerWorks HT2000 integrated dual Gigabit Ethernet ports

 PXE option ROM solution

 Front panel LED output

Integrated Graphics Controller

 ATI ES1000 PCI graphics controller

 32MB video memory

Integrated SATAII

 Independent DMA operation on 4 ports

 Support SW10- RAID 0, 1, 0+1 (optional)

 Support SW52- RAID 0, 1, 0+1, 5, 1n, 0+1n, 50 (optional)