User manual

CN27 Clear CMOS Header
1-2 2-3
Normal
(default)
Clear CMOS
CN30 COM2 Header
Pin Description Pin Description
8
1.2.1 Quick Installation Guide
1 2 SRD CD D
3 Serial In 4 RTS
5 Serial Out 6 CTS
7 8 RID TR
9 GND
CN33 Onboard VGA Select Jumper
1-2 2-3
VGA Enabled
(default)
VGA Disabled
CN18 PCI-X Slot Clock Select Jumper
1-2 2-3
100 MHz Enabled
133 MHz Enabled
(default)
CN21 USB Header
Pin Description Pin Description
1 VCC_1 2 VCC_2
3 Data -_1 4 Data -_2
5 Data +_1 6 Data +_2
7 Ground_1 8 Ground_2
9 10 NC/Key
CN32 PCI-X-ZCR Slot Clock Select Jumper
1-2 2-3
100 MHz Enabled
133 MHz Enabled
(default)
CN37 SATA LED Header
Pin Description
1 SATA0 LED
3 SATA1 LED
5 SATA2 LED
7 SATA3 LED
CN38 SCSI Select Jumper
1-2 2-3
SCSI Enabled SCSI Disabled
CN35 Front Panel Switch
CN36 Speaker PIN Header
Pin Description
1 Speaker
2 Buzzer
4 Speaker Power
LAN Connector Indicator Light
Indication Meaning
LED off No link
Left LED Green Active
Right LED Green Link
The Latest BIOS, Manual, Memory AVL, Drivers and Utility can be downloaded from
http://www.arima.com.tw/server
Recommended Memory Configurations
1 DIMM H1 Bank: Slot 1 or Slot 3 (This only provides 64-bit memory access)
2 DIMMs H1 Bank: Slot 1, 2 or Slot 3, 4
Single Processor H1 Bank: Slot 1, 2, 3, 4 * 4 DIMMs
Dual Processor H1 Bank: Slot 1, 2 or Slot 3, 4
H2 Bank: Slot 1, 2 or Slot 3, 4
6 DIMMs H1 Slot 1, 2, 3, 4 *
H2 Slot 1, 2
8 DIMMs H1 Slot 1, 2, 3, 4 *
H2 Slot 1, 2, 3, 4 *
* To support full speed of DDR400, please use [Single, Single, Single, Single] or [Double, Double, Single, Single] or
[Single, Single, Double, Double]. Besides, DDR400 is supported by CPU rev C0 and later.