User manual

Power LED:

This 3-pin connector attaches to the power LED.

HDD Activity LED:

This 2-pin connector attaches to the LED of the hard disk. The LED lights up

when HDD is active.

Power Switch:

This 2-pin connector attaches to the power button of the system.

Reset Switch:

This 2-pin connector attaches to the case-mounted reset switch for rebooting your

computer without turning on/off your power switch.

LAN#1 Activity LED: This connector connects to the LED that lights up when there is activity on the

LAN 1 port.

LAN#2 Activity LED: This connector connects to the LED that lights up when there is activity on the

LAN 2 port.

# Pin-27 to Pin-34 are reserved for OEM purpose