ARP 970 User Reference Manual
Specifications Model No CPU ARP970 ARP970-B Intel Core i5-2510E, 3M Cache, 2.50GHz Processors (Option: Intel Core i7-2710QE, 6M Cache, 2.10 GHz) Intel QM77 Express Chipset 3x Full-Size PCI-E (x8) slots Option: 3x full-size PCI-X slots/ 2PCI, 1PCI-E (x16) slots 15" TFT LCD Monitor, 1024x 768, 250 nits brightness, 16.2M, MTBF: 50,000 hours, Anti-reflection tempered strengthen glass LVDS, 3rd Generation Intel Core i7 / i5 / i3 QC/DC mobile processor integrated Gfx 2x 4GB DDR3 1x 500GB 2.
Standard Accessory Kits ARP 970 Model Accessory Kit SKD Qty 1 ARP970 Portable Computer system 1 2 Carrying Case with wheels 1 3 Driver CD 1 4 User’s Manual 1 5 Power Cord 1 6 Anti-Static Bag 1 7 Screw Pack (stabilizer) 1 8 Stabilizer Supports Pack 1 ARP 970 9 Carrying Case with Wheels ３
1.0 Introduction Version: 2012.
2.0 Getting Started 2.0 Operation 1. Releasing Keyboard from main unit by pushing up the 2 taps located on both side of the computer to release the locking mechanism, and then pull out the keyboard. Lift up Lift up Press to release 2. You have the option of leaving the keyboard attached to the computer or they can be release independently from the computer by pushing the two levers inward to release the lock. 3. Connect the RJ-45 keyboard/touchpad cable to the front bottom right corner of the computer.
4. You can flip the 2 feet located underneath the computer outward to help create an angle for the computer for viewing comfort. Power2 LED feet light 5. Connect the power cable outlet into the power supply unit Insert Power Cord 6. Press the power switch located on the front panel of the computer to power up the unit.
. Access the available expansion slots on the left side of the computer. ARP956 provides the system I/O port, include: 2x DB9 for COM1, COM2, DVI-D + DVI-I connector, 2x USB 3.0 connector, 4x USB 2.0 connector, DP connector, 2x Gbit LAN RJ-45, RCA Jack 3x1 for HD audio 8. Slim DVD-RW and 2x removable 2.5” drive bay on the right side of the computer. Slim DVD-RW 2x removable 2.
3.0 Internal Hardware Access Be sure power cable is not connected to the system before proceeding 1. Unscrew the top 4 thumb screws to release the top computer cover. Unscrew Unscrew Unscrew 2. Remove the top cover, and 2x card stabilizer bars, install add-in card into the slot.
4.0 Battery Pack (ARP970-B) 1. Battery Pack The lithium ion battery pack is on the right side of the computer. 2. AC Operation / Battery Charging Insert the adapter cord into the Power DC jack for recharging Power DC jack 3. LCD panel for battery capacity The LCD display shows battery array fuel gauge, power, current, charge/ discharge state, time to fully charged, time to empty.
4. Replacing the battery 4.1 Release the thumb screw of the battery cover Thumb screw 4.
5.0 Software Installation You can use the built-in DVD-RW to load operating system and additional applications software into the system. Available medium from USB or download can also be possible. DOS Boot up: DOS boot up requires you to have a version of the DOS installed on hard disk drive or floppy. Depending on the execution sequence you have set in the batch file, you will usually get a DOS prompt after loading.
6.0 Troubleshooting 1. Installation problem: 1. Normally problem with a fail start up is due to installation problem. 2. Double check all the peripheral cards or items you have added to the ARP. 3. Are all the items seated properly? 4. Are all the cables connected back to its original or correct position? 5. Are the items you have added compatible? 6. Before you check for these, turn the computer off and unplug the power cord. 7. Check for 1 thru 5 and then re-power up the computer. 8.
