User guide

23
LAN IP Filter
You can configure the device to block the specific IP address from accessing the LAN.
Click to access the LAN IP Filter page.
Adding an IP Address
1. Select the protocol and status.
2. Enter the IP address and corresponding port to be blocked from accessing the LAN.
3. Click Ok.
Changing an IP Address
1. Click in the Modification column. The corresponding IP address filter is
displayed.
2. Change the contents as required.
3. Click Ok.
Deleting an IP Address
Click in the Modification column.
The corresponding IP address filter is deleted.
Validating an IP Filter
1. Add a new IP address or select a record in the IP address filter table.
2. Select On for Status.
3. Click Ok.
4. Click Apply.
Virtual Server
Your device supports the virtual server to enable external computers to access WWW, FTP,
or other services provided by the LAN.
Click to access the Virtual Server page.
Adding a Virtual Server
1. Select the protocol and status.