User guide

4
2 Quick Setup
You can use the quick setup wizard to configure and maintain the basic parameters of the
device. Click Quick Setup to access the welcome page. Click Next to configure the PPP
profile settings.
Configuring PPP Profile Settings
Ÿ Profile Name: Enter a profile name when the text box is empty.
Ÿ Dial-up Number/PPP User Name/PPP Password: Enter these three parameters
provided by the internet service provider (ISP). The dial-up number is used to initiate the
network call; the PPP user name and PPP password is used to obtain the service
authorization provided by the ISP.
Ÿ APN/IP Address: Select the mode for obtaining the access point name (APN) and IP
address. If the carrier provides the relevant parameters, select Static and enter their
values. Otherwise, select Dynamic and the device automatically obtains them.
Configuring PPP Dial-up Settings
PPP Connection: Select the dial-up access mode.
Ÿ Auto: The device automatically connects to the Internet and does not disconnect when
no data is transmitted.
Ÿ On Demand: The device automatically connects to the Internet when data transmission
exists. When the duration of no data transmission exceeds the maximum idle time, the
device disconnects the Internet connection.
Ÿ Manual: The device connects to the Internet after you click Connect on the connection
page. For details, see "Accessing the Internet."
PPP Authentication: This service is provided by your ISP. For details, consult your ISP.
Configuring WLAN Settings
(Name) SSID: Enter a name for your wireless local area network (WLAN).
The service set identifier (SSID) is used to identify a WLAN. A PC and the wireless device
can perform normal data communication only when they have the same SSIDs. To ensure
the WLAN security, do not use the default SSID. You can enter a character string as the