INSTALLATION INSTRUCTIONS 3” BULL BAR 2017 FORD SUPER DUTY F250-F350 PART # 35-3014 / B35-3014
3” BULL BAR 2017 FORD SUPER DUTY F250-F350 PARTS LIST: 1 Bull Bar 4 10-1.5mm x 30mm Hex Bolts 1 Driver/left Frame Mounting Bracket 8 10mm x 27mm OD x 3mm Flat Washers 1 Passenger/right Frame Mounting Bracket 4 10mm Nylon Lock Nuts 2 Spacer Plates Spacer Spacer Passenger/left Side Mounting Bracket Driver/right Side Mounting Bracket ! NOTICE Bull Bar may interfere with the performance of forward facing cameras and sensors , if equipped. PROCEDURE: REMOVE CONTENTS FROM BOX.
” BULL BAR 2017 FORD SUPER DUTY F250-F350 Driver/left Side Installation Pictured Front (Fig 1) Remove cover over bumper bolts Fig 2 Front (Fig 3) Remove outer bumper bolts only (driver/left front of bumper pictured) (Fig 4) Install Bracket over Spacer Page 2 of 3 8/11/16 (DP)
3” BULL BAR 2017 FORD SUPER DUTY F250-F350 Driver/left Side Installation Pictured Reuse factory bumper bolts to attach Bracket and Spacer to Bumper (2) 10mm x 30mm Hex Bolts (4) 10mm Flat Washers (2) 10mm Nylon Lock Nuts Fig 5 (2) 10mm x 30mm Hex Bolts (4) 10mm Flat Washers (2) 10mm Nylon Lock Nuts Front (Fig 6) Attach Bull Bar to outside of Brackets Front (Fig 7) Driver/left side complete installation Complete Installation Page 3 of 3 8/11/16 (DP)
