Installation Guide

Page 1 of 3 8/16/2010

PARTS LIST:

Qty Description Qty Description

1 Grill Guard 6 12mm Lock Washers

1 Driver/Left Lower Mounting Bracket 6 12mm Nuts

1 Passenger/Right Lower Mounting Bracket 2 10mm x mm Hex Bolts

1 Driver/Left Upper Brace Bracket 4 10mm Washers

1 Passenger/Right Upper Brace Bracket 2 10mm Lock Washers

6 12mm x 40mm Hex Bolts 2 10mm Nuts

12 12mm Flat Washers

INSTALLATION INSTRUCTIONS

2011 FORD SUPER DUTY

3064 / 3064-2

NOTE:

(

ehicle Retains Tow Hook

)

Passenge

Right

Side Mounting

Bracket

Drive

Left Side

Mounting

Bracket

Driver/left side

Upper brace bracket

Passenger/right side

upper brace bracket

PAGE 1
INSTALLATION INSTRUCTIONS 2011 FORD SUPER DUTY 3064 / 3064-2 NOTE: (Vehicle Retains Tow Hook) PARTS LIST: Qty 1 1 1 1 1 6 12 Description Grill Guard Driver/Left Lower Mounting Bracket Passenger/Right Lower Mounting Bracket Driver/Left Upper Brace Bracket Passenger/Right Upper Brace Bracket 12mm x 40mm Hex Bolts 12mm Flat Washers Driver/Left Side Mounting Bracket Driver/left side Upper brace bracket Page 1 of 3 Qty 6 6 2 4 2 2 Description 12mm Lock Washers 12mm Nuts 10mm x mm Hex Bolts 10mm Washers 10
PAGE 2
PROCEDURE: 1. REMOVE CONTENTS FROM BOX. VERIFY ALL PARTS ARE PRESENT. READ INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION. 2. Starting with the Driver/Left side Begin your install by removing the bumper mount bolts WARNING, Do not remove Passenger & Driver side bumper bolts at the same time as bumper will drop down. Remove and install only one side at a time. (Fig 1) shows factory bolts location.
PAGE 3
INSTALLATION PICTURED Fig 1 Fig 1A Driver/Left side Mount Bracket Attached Driver/Left side Factory bolts to be removed Fig 2 Driver/Left side Brace Bracket attached to vehicles inner bumper Fig 2A Location of factory 13mm bolt passenger/Right side shown.