Installation Guide

ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
87 7. 2 8 7. 8 6 3 4
•
2563001-INS-RA
•
PAGE 5
Step 13
Secure the camera to the camera holder
using three M2 button head screws
and reattach the camera wire.
Slide the camera into the housing.
Step 16
Secure your spare tire to the carrier.
Congratulations on the installation of
your new ARIES spare tire carrier.
With the spare tire carrier installed,
periodic inspections should be performed to
ensure all mounting hardware remains tight.
To protect your investment, see the
'Notes and Maintenance' section on page one.
Step 14
Secure the camera to the camera housing
using the two M6 button head screws.
Step 15
Feed the wiring harness back into the
tailgate and secure the grommet into the
door. Open the door and reconnect the
wiring harness to the clips inside the door.
Replace the plastic covers inside
the door ensuring all of the clips
are tightly snapped. Use zip ties to
secure the wiring harness to the carrier.