Installation Guide
ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
87 7. 2 8 7. 8 6 3 4
•
2563001-INS-RA
•
PAGE 1
INSTALLATION MANUAL
2563001
Parts List
1 Main center section
1 Brake light, upright
1 Brake light, pedestal
1 Wheel holder
1 Wheel holder adapter
1 Camera holder
1 Camera housing
1 Camera removal tool
4 Rubber spacer washer
3 Tube spacer
2 Hinge covers
3 Button head screw, M2
2 Button head screws, M6
4 Hex bolt, M6 x 100mm
8 Flat washer, M6
4 Nylock nut, M6
4 Carriage bolt, M8 x 25mm
4 Flat washer, M8
4 Lock washer, M8
4 Hex nut, M8
3 Hex bolt, M10 x 80mm
3 Hex bolt, M10 x 30mm
4 Hex bolt, M10 x 60mm
10 Carriage bolt, M10 x 30mm
13 Flat washer, M10 x 20mm OD
4 Flat washer, M10 x 30mm OD
13 Hex nut, M10
17 Lock washer, M10
3 Zip tie
1 Foam tape
Tools Required
Ratchet Allen wrench set
Socket set Level
Torque wrench --
Maintenance
To protect the product, wax after installing. Regular waxing is recommended
to add a protective layer over the finish. Do not use any type of polish or wax
that may contain abrasives that could damage the finish.
For polished, gloss and other smooth finishes,
polish may be used to clear small scratches and scuffs on the finish.
Mild automotive detergent may be used to clean the product. Do not use dish detergent, abrasive
cleaners, abrasive pads, wire brushes or other similar products that may damage the finish.
Product Photo
Torque Specifications
Metric
M6 bolt 3 ft-lbs.
SAE
1/4" bolt 3 ft-lbs.
M8 bolt 7 ft-lbs. 5/16" bolt 7 ft-lbs.
M10 bolt 16 ft-lbs. 3/8" bolt 16 ft-lbs.
M12 bolt 28 ft-lbs. 7/16" bolt 20 ft-lbs.
-- -- 1/2" bolt 28 ft-lbs.
Use above torque setting unless otherwise noted
Product Registration and Warranty
CURT Group stands behind our products
with industry-leading warranties. Provide
feedback and help us to improve our
products by registering your purchase at:
warranty.curtgroup.com/surveys
Level of Difficulty
Moderate
NOTICE
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
To help prevent damage to the product or vehicle, refer to the specified
torque specifications when securing hardware during the installation process.