Installation Guide

PAGE 1 • 2072100-INS-RC • 877.287.8634 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM

Product Image

Notes and Maintenance

Before you begin installation, read all instructions thoroughly.

Proper tools will improve the quality of installation and reduce the time required.

For black ﬁnishes, mild soap may be used to clean the product.

Refer to the table to the left when securing hardware during the

installation process to help prevent damage to the product or vehicle.

Level of Difﬁculty

Easy

Tools Required

Torque wrench Socket, 21mm

Socket, 17mm

Scan

for helpful

install tips

Parts List

2 Winch adapter plate

4 Hex head bolt,

M10 - 1.50 x 120mm

8 Flat washer, M10

4 Lock washer, M10

4 Hex nut, M10

2 Carriage bolt, M14 - 2 x 50mm

2 Serrated ﬂange nut, M14

This hardware is for a standard

winch installation. Due to manufacturer

deviation additional hardware may

be required.

INSTALLATION MANUAL 2072100

Torque Speciﬁcations

METRIC

M6 bolt 3 ft.-lbs.

M8 bolt 7 ft.-lbs.

M10 bolt 16 ft.-lbs.

M12 bolt 28 ft.-lbs.

SAE

1/4" bolt 3 ft.-lbs.

5/16" bolt 7 ft.-lbs.

3/8" bolt 16 ft.-lbs.

7/16" bolt 20 ft.-lbs.

1/2" bolt 28 ft.-lbs.

Use above torque setting

unless otherwise noted

PAGE 1
INSTALLATION MANUAL Parts List Level of Difficulty 2 Winch adapter plate Easy 4 Hex head bolt, M10 - 1.50 x 120mm 8 Flat washer, M10 4 Lock washer, M10 4 Hex nut, M10 2 Carriage bolt, M14 - 2 x 50mm 2 Serrated flange nut, M14 2072100 Scan for helpful install tips Product Image This hardware is for a standard winch installation. Due to manufacturer deviation additional hardware may be required.
PAGE 2
Step 1 Place the winch adapter plate onto the slot in the bumper. Place the winch on the adapter. Note: If using the roller fairlead, this needs to be attached prior to the placement of the winch. Step 2 Attach the winch and adapter plate to the bumper using four M10 hex bolts, lock washers and flat washers. Run the bolts up into the winch from the inside of the bumper. Note: Some winches may require additional mounting hardware.