Installation Guide

GRILLE GUARD
07-14 TOYOTA TUNDRA, 08-14 SEQUOIA
Page 6 of 8 5/19/14 Rev1 (DP)
Passenger/right Side Installation Pictured
(2) 12mm x 35mm Hex Bolts
(2) 12mm Lock Washers
(2) 12mm Flat Washers
(2) 12mm Plastic Washers
(between Grille Guard and Bracket)
Fig 11
Insert a Plastic Washer between the
Grille Guard and the Frame Mounting
Bracket on each 12mm Hex Bolt
(Fig 10B) Driver side 07-13 pictured from above
Front
Front
Front
Fig 12
(Fig 10A) Passenger side Top Bracket
and Top Frame Bracket illustrated
Attach Top Bracket to
Frame Bracket with:
(2) 8mm x 25mm Hex Bolts
(2) 8mm Lock Washers
(2) 8mm Flat Washers
(2) 8mm x 25mm Hex Bolts
(2) 8mm Lock Washers
(2) 8mm Flat Washers
Insert (1) 12mm Hex Bolt and
Washers per side then rotate
Grille Guard up and in position
Front