Installation Guide

PAGE 1 • 1501263-INS-RC • 877.287.8634 • NEED ASSISTANCE? • ARIESAUTOMOTIVE.COM
Product Image
Level of Difficulty
Easy
Parts List
2 LED light cover, 2" x 10"
Scan
for helpful
install tips
INSTALLATION MANUAL 1501263
Step 1
Align the light cover with the front face
of the LED light. Press the cover onto
the LED light until the top and bottom
locking tabs snap into the groves on the
LED housing. Confirm the installation by
ensuring all the tabs are fully engaged.
To remove the light cover, gently lift
the locking tabs to release them from
the groves in the LED housing. With the
tabs disengaged, pull the cover away
from the LED housing.
CAUTION: Using excessive force to lift
the locking tabs may damage the cover.
Only lift the tabs enough to clear the
groves in the LED housing for removal.
Note
ARIES LED lights are intended for
off-road use only. The end user is
solely responsible for the knowledge
of and adherence to all applicable
federal, state and local laws and
regulations pertaining to their use
of our product.