Owners manual

ARIESAUTOMOTIVE.COM • NEED ASSISTANCE? • 800.798.0813 • 1110311-INS-RA • PAGE 2
Step 1 - Mounting Style 1
Hold the nut plate up to the desired
mounting location on the back of
the headache rack mesh.
Attach the mounting bracket using an
M8 hex bolt, flat washer and lock washer.
Skip to step 3.
Step 1 - Mounting Style 2
Insert an M8 hex bolt into the top track
on the headache rack and slide the bolt
to the desired position.
Step 2 - Mounting Style 2
Place the light mounting bracket on
top of the M8 hex bolt and secure the
bracket using an M8 flat washer, lock
washer and hex nut.
Step 3
Using the hardware provided
with the light, attach the light
to the mounting bracket.
Tighten all hardware to the
recommended torque specifications
listed in the table on the first page.
With the mounting bracket installed,
periodic inspections should be
performed to ensure all mounting
hardware remains tight.
Congratulations on the installation of
your new ARIES light mounting brackets.
Mounting Style 1 Mounting Style 2