Product Manual
GB - 17
OPENING AND CLOSING HOOD
To open, pull up on the back of the hood until
hood hits the hood stop and push down on
back of hood to close (figure 9).
OPENING DECK ACCESS PLATE
1. Install adjustment pin in the first
adjustment hole (figure 10).
2. Put parking brake on.
3. Raise deck access plate.
REPLACING MOWER BLADE
Remove (Figure 11)
1. Block mower blades to prevent rotation.
2. Remove mounting hardware and mower
blades from mower deck.
Install (Figure 11)
1. Install mower blades on mower deck
with mounting hardware.
2. Torque 5/8-inch hex bolt to 80 to
120 lbf-ft (108 to 163 N•m)
Hood tipped open.
Figure 9
Figure 10
1. Adjustment Pin
2. Deck Access plate
1
2
CAUTION: Mower blades are
sharp and can cut you. Wrap the
blades or wear gloves, and use
extra caution when servicing them.
Figure 11
1. Flat Washer
2. Bevel Washer
3. 5/8-inch Hex Bolt
4. Mower Blade
4
1
2
3