Operator's Manual
Table Of Contents
- Welcome
- Register Your Product!
- Safety
- Practices & Laws
- Emission Control System
- Required Operator Training
- Safety Alert Symbol
- Signal Words
- Safety Decals
- Safety Rules
- Controls & Features
- Engine Key
- Primer Bulb
- Fuel Valve
- Electric Start Button
- Choke Control Knob
- Throttle Control Knob
- Speed Selector Lever
- Attachment Clutch Lever (Right Side)
- Traction Drive Clutch Lever (Left Side)
- Dual Handle Interlock
- Discharge Chute Rotation Lever
- Discharge Chute Deflector Lever
- Discharge Chute Control Switch
- Heated Hand Grip Switch
- Scraper Blade
- Skid Shoe
- Auger
- Impeller
- Shear Bolt
- Auto-Turn™ Steering
- Height Adjustment Lever (Right Side)
- Operation
- Emergency Stopping
- Before Operating Unit
- Start The Engine
- Operate Unit
- Stop the Engine
- Transport Unit
- Engine Operation Angle
- Maintenance
- Service Position
- Maintenance Schedule
- Service Parts
- Add Fuel Stabilizer
- Check Dual Handle Interlock
- Check Fasteners
- Check Clutch Operation
- Check Tire Pressure
- Check Engine Oil
- Change Engine Oil
- Check Auger Gearcase Oil
- Lubricate Unit
- Adjustments
- Adjust Scraper Blade
- Adjust Skid Shoes
- Replace Shear bolts
- Adjust Discharge Chute Deflector Lever
- Adjust Discharge Chute Deflector
- Adjust Discharge Chute
- Adjust Speed Selector Lever
- Adjust Attachment Clutch & Brake
- Adjust Traction Drive Clutch
- Adjust Height Adjustment Cable
- Troubleshooting
- Storage
- Short Term
- Long Term
- Start-of-Season Fuel Preparation
- Accessories
- Specifications
- Warran ty
- Blank Page
EN - 3
4. Notice
NOTICE: Indicates information or procedures
that are considered important but not hazard
related. If not followed, property damage
could result.
5. Important
IMPORTANT: Indicates general reference
information worthy of special attention.
SAFETY DECALS
The safety decals on your machine are visual
reminders of the important safety information
in this manual. All messages on your unit
must be fully understood and carefully
followed. Safety decals on the machine are
explained below.
Always replace missing or damaged safety
decals. Replacement decal information is in
the parts manual for your machine. Decals
can be ordered from your dealer.
See Figure 2 for safety decal locations.
Safety Decal Locations
Safety Decal Descriptions
Figure 2
1
2
1. CAUTION!
Danger!
Only use clean-out tool to
clear blockages. NEVER
use your hands.
High-speed auger/impeller
rotates below discharge
opening. Wait for all moving
parts to stop before
removing clogs or servicing.
NEVER direct discharge
towards persons or property
that may be injured or
damaged by thrown objects.
Keep people away from unit
while operating. Keep
children out of work area
and under watchful care of a
responsible adult.
Stop engine, remove key,
and read manual before
making any repairs or
adjustments.
Read operator’s manual.
Wear appropriate hearing
protection.