Operator`s manual

EN – 19
See Figure 26.
6. Remove hardware securing auger bushings to auger
housing.
See Figure 27.
7. Remove auger assembly from auger housing.
See Figure 28.
8. Remove bushing from auger shaft end.
9. Remove shear bolt from auger shaft.
10. Slide auger off auger shaft.
NOTICE: If rust is present on auger shaft, remove with
sand paper and wipe clean with oil.
Install Auger
See Figure 29.
1. Install auger onto auger shaft with auger kickers facing
gearcase.
IMPORTANT: Make sure auger helix direction matches the
original auger orientation.
2. Apply grease to grease zerk and spin auger by hand
to spread grease along auger shaft.
3. Repeat step 2.
Figure 26
1. Tapping Screw
2. Auger Bushing
1
2
Figure 27
Figure 28
1. Shear Bolt
2. Bushing
3. Auger
1
2
3
Figure 29
1. Auger Kicker
2. Gearcase
3. Grease Zerk
1
2
3