Product Manual
Table Of Contents
- DH2000 CORDLESS HEDGE TRIMMER (w/ battery and charger) DH2000W CORDLESS HEDGE TRIMMER (w/o battery and charger)
- Table of Contents
- Introduction
- Servicing Information
- Safety
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Disposal
- Specifications
- Warranty Statements
- Product Registration
- Notes
DH2000 MAINTENANCE
X7508170201 25
© 03/2016 ECHO Inc.
Gear Box
Note: Apply lithium based grease every 15-20 hours of use.
Actual use and your experience will determine the
frequency of required maintenance.
1. Clean dirt from the grease fitting (A).
2. Apply 3 pumps of grease [about 2 g (0.07 oz)] into fitting,
DO NOT over fill. Leave room for the grease to expand
during operation.
3. Wipe excess grease from around grease fitting.
Blades
Read, understand, and follow all safety and operating instructions in this manual.
Blades should only be removed and reinstalled by an Authorized Shindaiwa Servicing Dealer, otherwise
premature wear or internal damage may occur.
Note: Inspect blades, and clean and sharpen as needed. Lubricate blades periodically during use.
Sharpening
Hedge Trimmer blades are very sharp. Touching them may lead to severe personal injury. Avoid
touching blades whenever possible, and always wear gloves to protect hands.
Parts Required: Lithium Based Grease.
Parts Required: none