Product Manual
Table Of Contents
- DH2000 CORDLESS HEDGE TRIMMER (w/ battery and charger) DH2000W CORDLESS HEDGE TRIMMER (w/o battery and charger)
- Table of Contents
- Introduction
- Servicing Information
- Safety
- Description
- Contents
- Assembly
- Operation
- Maintenance
- Troubleshooting
- Storage
- Disposal
- Specifications
- Warranty Statements
- Product Registration
- Notes
DH2000 ASSEMBLY
X7508170201 17
© 03/2016 ECHO Inc.
ASSEMBLY
Battery Installation
Read, understand, and follow all safety and operating instructions in this manual.
The hedge trimmer will operate when the battery is installed,
the power indicator LED is lit, and the throttle trigger, throttle
trigger lockout, and interlock switch are engaged. Make sure
the hedge trimmer is properly positioned to prevent loss of
control and possible serious injury. Keep movable parts of the
hedge trimmer off the ground and away from objects that
could become entangled.
Note: The battery comes partially charged from the factory and
needs to be fully charged before first use.
1. Make sure power to unit is turned off.
Note: DH2000 shipped with battery attached to hedge trimmer with
battery spacer. Remove screw (D), and remove battery
spacer (E) for initial battery installation.
2. Align ridges (A) on battery pack with grooves in hedge trimmer.
Slide battery pack into hedge trimmer.
Assure the battery pack latch (B) snaps into place and battery pack
is secure before beginning operation.
Note: Battery pack latch release (C) is in the closed (X) position
when battery pack latch (B) is correctly engaged.
3. To remove battery, move battery pack latch release (C) to the
open (Y) position and slide battery pack out of hedge trimmer.