Use and Care Manual

C-Series Whirlpool User Manual with Bluetooth C-Series Whirlpool User Manual with Bluetooth
Turn on/off the Display:
 This system remains on “standby” when power is supplied to the whirlpool system.
1. If the system is in “standby” mode, the 'Power Standby' on/off icon will be partially visible on the dark screen. On standby, if an
y
portion of the screen is touched the backlight w
ill display at 50% strength. To activate the system, on the display, press and
hold the
'Po
wer Standby' button for 3-seconds. When the unit is first activated the current temperature (°C) will display on the screen.
2. There is a 2-hour timer programmed into this system, all functions will automatically turn off and the system will go into “standb
y”
mode, 2-hou
rs from sy
stem activation.
3
. To turn off all functions of the system, placing the unit in standby, press the 'Power Standby' button on the display.
Music Feature
: Radio / Bluetooth
While the computer system is on, press the Music button to activate either the FM
radio or Bluetooth functions. When the radio function
is selected, a “3 dB” will first show on the display panel, indicating a volume adjustment; to adjust the volume, press the
Volume/Parameter “UP” or “DOWN” buttons until desired volume is achieved. The volume adjustments span from “0” to “19” “dB” (“3 dB”
being default). After 5-seconds the display will change to a frequency reading, indicating a frequency adjustment; to adjust the
frequency, press the Volume/Parameter “UP” or “DOWN” buttons until desired frequency is found. The system will automatically use
the last frequency selected when the radio function us used again.
To search for a new radio channel, while the radio function is in the frequency mode, press and hold either the Volume/Parameter “UP”
or “DOWN” button for 2-seconds, and it will automatically search for the next radio station with a strong/steady signal.To program a
frequency into the channel memory, While the system in the search mode,press the Channel Memory botton for 2-seconds,”CH=0” will
display on the screen; use the Volume/Parameter “UP” or “DOWN” buttons to select different channel numbers (1-10); wait for 3-
seconds then system will save the frequency to the channel number of your selection.To select between the preset memory channels,
while the radio is functioning, press the Memory button, then use the Volume/Parameter “UP” or “DOWN” buttons.
Water Jet Feature
:
The water pump and features directly related to the whirlpool system only work when the water level inside the tub is above the
water-level sensor. The water-level sensor is hidden behind the tub wall. This system has two sensors; the other sensor is the
temperature sensor. The temperature sensor is visible from inside the tub, usually underneath the overflow drain knob (depending on
model).
Press the 'Water Jet' button to activate the water pump and aslo unlock the other [optional] whirlpool features. If the water level
inside the tub is not above the water-level sensor, the 'Water Jet' icon will flash and the other [optional] whirlpool features will remain
locked. If the water jet feature is turned on but the water is not yet at a safe level, the whirlpool feature will automatically turn on when
the water reaches an appropriate level. The default operating time for the water jets is set for 20-minutes. If the water jet feature and
air bubble feature are both activated, but at different times, both features will still automatically turn off at 20-minutes. To stop the
"Water Jet" feature, press the "Water Jet" icon on the display.
Underwater Color Light
: C = Color Color: 1 ~ 7
The underwater tub light has color and intensity adjustments. Press the ‘Color Changing Lights’ button to turn on the underwater lights.
The light color is white, first (C=1); to change the intensity of the light, press the ‘Color Changing Lights’ button again to the next
brightness setting; press again to the next brightness setting; press again to turn off; there are 2 color brightness settings and an
“OFF” setting; a cycle of 3-positions in total.
To change the color of the light, while the light function is on, press the ‘Parameter Setting’ button, and then press the 'Parameter UP'
or ‘DOWN’ buttons; the light function will cycle through 7 settings: “C=1” to “C=7”.
Brightness Underwater Light
: B = Brightness Brightness: 1 ~ 3
Another way to adjust the tub light intensity, while the light function is on, press the ‘Light Brightness’ button, and then press the
‘Parameter UP’ or ‘DOWN’ buttons: “B=1” to “B=3”.
.
To select the Bluetooth function, press the Music button again, cycling past Radio feature. The Bluetooth symbol will appear on the
upper portion of the display, and “bt” near the center of the display. When first turned on, the Bluetooth feature will scan for an audio
source Bluetooth device; use your audio source Bluetooth device to scan and “pair” the connection.
The Bluetooth system is named “Whirlpool”; the password is “1234”. When the Bluetooth systems “pair”, the Bluetooth feature will
chime, indicating they have successfully connected.
The Bluetooth feature will only play audio output, and will not accept vocal input. If there is an incoming or outgoing call during music
streaming, the music will automatically stop playing, and will automatically continue when the call is ended. To deactivate the Bluetooth
feature, press the Music button to cycle the radio feature into the ‘off’ position.
If the system automatically connects to an undesired “paired” device, deactivate the Bluetooth function by pressing the Music button,
then press and hold the Music button for 3-seconds, and then the Bluetooth symbol will start to flash and the system will be placed in
scan mode.
Turn off and on the Bluetooth function or open Bluetooth function on the device for connection and pairing with the “Whirlpool”.
Sound volume can adjust using the parameter setting buttons set into 9 different volume levels..
Press Channel Memory button to select music, when the screen showed 'bt' sparking then press the Volume/Parameter "UP" and
"DOWN" to shift music.
Page 5 /
9
Pa
ge 6 / 9
Heatpump Feature: Temperature: 35 ~ 43°C (95°F ~ 109.4°F)
The heatpump function will remain locked-out until both the water jet feature is turned on and the water-level sensor is activated. The
waterlevel sensor is activated when the tub is filled and the water level inside the tub surpasses the height of the water-level sensor.
If the waterlevel sensor does not sense water at a safe water level both the heatpump and water pump will turn off. The heatpump
function also has a thermostat feature in which you can set a desired temperature also which the heatpump will activate. The default
temperature of the thermostat is set at 38°C (100.4°F). You can change the thermostat setting between 35°C (95°F) to 43°C
(109.4°F). If the temperature of the tub water is above this set temperature of the thermostat, the heatpump feature will not activate.
Because this system is a “tub” designed to use fresh water for each use, this system uses a “heatpump” system; as it is not a “pool”
in which is designed to continuously use chemically treated water which uses a water “heater” system. “Heatpump” systems are
designed to produce just enough heat to prolong the warmth of a tub of water, but not specifically designed to heat a pool of water to
a normal “spa” operating temperatures. This is designed to be safer and more efficient for household use.
To adjust the thermostat setting for the heatpump function, ensure there is adequate water level; press the heatpump button so that
the heatpump feature is on, and then press the Parameter Setting button Up or Down until the desired setting is selected. To turn
off the heatpump feature, simply press the heatpump button until the icon is unlighted or off. If the whirlpool system is shut off with
the heatpump running, the system will delay the shutdown process for a few short seconds until the heatpump slightly cools.