Installation Guide
WARNING: You must turn o the cold and hot water supply to the location of installation before
starting the installation.
Connecting to the Supply Lines
-Note, the connection to the cold and hot supply lines is not provided. Two exible hoses, which are pro-
vided with the shower panel unit, make the connection between the supply lines and the shower panel.
-Standard female 3/8” compression threads with appropriate washers for connections are used for the
hoses.
-Separating the cut o valves for the cold and hot water supply lines will assist in any future service per-
formed to the unit. It is recommended that you do this, although it is not required.
-Purchase the appropriate valves and tting for your installation that will provide male 3/8” compression
threads for attachment to the exible hoses.
-Before continuing your installation, the supply connections must be completed.
Mounting Your Showerhead
-Install the rubber washer onto the showerhead and install onto the shower arm.
Mounting the Brackets of the Shower Panel
While mounting the brackets of your new shower panel, the following will inuence your decision on
which height to mount the unit at:
-It is recommended that the shower panel be mounted at a height that will make the unit accessible to
people of varying heights. at way, various people in the home can enjoy the shower panel.
-A comparison between the height of the overhead rain shower to the body jets and the height of all of the
people who will be using the shower panel.
-Whether or not the height you choose will allow the shower panel to completely cover up the connection
points for the cold and hot water supplies.