Installation Guide
Plumbing Requirements:
-Flow rate: 2.5 gallons per minute (gpm)
-Water pressure: 60 to 80 psi for both cold and hot supply lines
You will have to speak with a plumber regarding the installation of a booster pump or enlarging your sup-
ply lines if your water supply in unable to meet the requirements above.
Tools You Will Need:
-3 foot level
-Drill, screwdriver attachments & masonry or tile drill bits
-Teon tape
-Adjustable wrench
-Bathroom rated silicone sealant
-Caulk gun
-Tape measure
-Phillips head screwdriver
-Pipe cutter
Items You Will Need (Note, these are not provided):
-e appropriate diameter drill bits for your wall surface, including ¼” and 5/16”
-Standard male 3/8” compression threads supply line connection ttings
-Optional supply line cut o valves with standard male 3/8” compression threads
e installation guidelines assume that rough plumbing has already been nished and that shower walls
are nished.
IMPORTANT: ese guidelines assume that you are performing a remodel on your bathroom. e only
items needed to operate an Ariel Shower Panel are separate cold and hot water supply lines. e shower
panel is a replacement of any mixing valve set up you are currently using. If you are thinking of using
your current mixing valve set up, it is recommended that you use a retrot unit, which is specically
designed for that use.