Installation Guide
Instructions for Installation
Carefully read and follow the instructions in the following guidelines. If you fail to follow these recom-
mended instructions and techniques for installation, you risk aecting the warranty claims for your prod-
uct and causing damage to the unit and the surrounding area.
IMPORTANT: In order to install this shower panel, simple understanding of plumbing techniques will
be necessary. Please contact your dealer or a professional plumber if you are unfamiliar with plumbing
techniques or have questions.
While determining the installation location for your new unit, we recommend you take into account the
guidelines below. All installations are unique and these guidelines are general:
1. is shower panel is designed for indoor use ONLY. It is not intended for outdoor use or other
uses.
2. We have provided exible supply hoses. It is recommended that you consider installing individual
cut o valves for the cold and hot water supplies.
Prior to installation, make sure to check your unit for the following:
1. Look over all of the unit’s components. Check for damaged and broken components and sections.
2. Contact your dealer or the manufacturer if you nd damaged sections.
Vacuum Break
e risk of backow, which can contaminate the drinking water supply, is reduced
by a vacuum break. A vacuum break, pictured here, is a backow preventer. e vac-
uum break will emit a small amount of water when the shower is turned on (when
the hand shower is above the level of the vacuum break) and/or when the shower
control valves are opened and closed. e presence or absence of water pressure in
the supply line causes the seating and unseating of the diaphragm.