Installation Guide
Ariel Platinum
TB222 Toilet
Ariel Platinum TB222 Contemporary
European Toilet
• GPF 0.8/1.6
• Waste Pipe Diameter 2"
• Waste Pipe Rough-IN 12"
• Water Supply Thread 1/2" T hreaded Male connection,
1/2" Female hose with 7/8" Male Adaptor with compre-
ssion tting
•
• Water Supply Location (measurement from side of the
toilet)
• Width of rear of toilet at 6 -inches from oor:
• Waste Pipe Connection: One te technology connection
pipe
• Flush Location: Top
• Flush Type: Dual
•
• Soft Close: Yes
• Siphonic Jet Feature: YES
Meets or Exceeds the following Specications:
• ASME A112.19.2-2008/CSA B45.1-08 for Vitre-
ous China Fixtures
• Watersense
• UPC
THIS COMBINATION IS DESIGNED TO ROUGH-IN AT A MINIMUM
DIMENSION OF 305MM (12”) FROM FINISHED WALL TO C/L OF TOILET.
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED,
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY
• Bowl Height: 14.6
• Overall Depth: 27
• Overall Width: 16
• Overall Height: 24.6
Dimensions:
Nominal Dimensions
Compliance Certication
NOTES:
IMPORTANT: Dimensions of xtures are nominal and may vary within
the range of tolerance established by ANSI Standard A112.19.2
These Mesurements are subject to change. No responsibility is assu-
med for use of superseded or voided pages.