User's Manual

ARIAKON SIM-5, SIM-5N .68 CALIBER PAINTBALL MARKER
LAODING YOUR MARKER CONTINUED
Page 12
STEP 5: Loading your marker with Paint Balls.
Start off by opening the back end of your hopper.
**LOOK INSIDE YOUR HOPPER TO ENSURE NO DEBRIS OR
OTHER THINGS ARE INSIDE BEFORE YOU LOAD THE PAINT.**
SETP 6: Load the hopper with
paint balls as shown in picture ‘B’.
** Use of high quality paint balls
are always recommended to
ensure accuracy and less
problems with breaking paint.**
STEP 7: Close the lid as shown in
picture ‘C’
A
B C
ARIAKON SIM-5, SIM-5N .68 CALIBER PAINTBALL MARKER
DISASSEMBLY CONTINUED
Page 17
B
Diagram 1-2 Sight Housing Removal cont...
B and B1— Gently pull the whole Sight Rail (part # 1) while lifting the
back end over the connector pin (part # 27) towards the direction shown.
Diagram 1-3 Barrel Removal
A B
A— Pull the Barrel Retaining Pin (part # 13) out.
B— After pin has been removed pull the barrel towards the direction
shown. **NOTE: BARREL DOES NOT UNSCREW**
Diagram 1-4 Removing Marker Internals
A
A—Begin by unscrewing the Velocity Adjustor Screw (part # 29)
B1