User guide

Page 8 0040501004 5010
Operating and installation instructions
Thrust actuator ARI-PREMIO-Plus
4.3.3 Parts list
Pos. Designation Pos. Designation
50.1 Gearbox 50.36 Set collar
50.1.1 Gearbox cover plate 50.37 Grub screw DIN 913-M3x5
50.2 Cable gland 2 x M16x1.5 50.38 Guiding spindle
50.3 Blind disc 50.39 Hexagon nut DIN EN24034-M5
50.4 Sealing plug 1 x M16x1,5 50.40 Synchronous motor, complete
50.6 Hood 50.40.3 Motor capacitor
50.7 Hood seal 50.41 Head cap screw
DIN EN ISO 4762-M4 - 18
50.8 Counter-sunk screw DIN EN ISO
10642 - M5x20
50.43.2 Torque switch
50.9 Sealing washer DIN EN ISO 7089 -
5,3
50.45 Shift lever
50.10 Column 50.46 Washer
50.11 Conical spring washer 50.48 Connector, 3-pole (standard)
50.12 Handwheel 50.57 Head cap screw
DIN EN ISO 4762 - M4x10
50.14 Yoke 50.58 Protective conductor terminal
50.16 Spring washer DIN 128-A10 50.59 Head cap screw
DIN EN ISO 4762 - M4x6
50.17 Hexagon head screw
DIN EN ISO 4017 - M10x40
50.87 Threaded bush
50.19 T-head bolt DIN 261-M12x40 50.96 O-ring DIN 3771 – 4 x 1.8
50.20 Washer DIN EN ISO 7089 50.119 Fan wheel
50.21 Spring washer DIN 128-A12 50.127 Washer ISO 7093-1
50.22 Hexagon nut DIN EN ISO 4032 - M12 50.128 Sealing nut M6
50.23 Lift dial 50.130 Manual operating device SW17
50.24 Distance column 50.134 Actuator control
50.25 Hexagon nut DIN 980-V-M16 50.138 Board support
50.26 2-ear clamp (stroke indicator) 50.139 Protective cover
50.27 Coupling 50.140 Switch cover
50.29 O-ring 50.141 Trip slide
50.30 Driving spindle 50.142 Shakeproof washer
50.31 Spindle safety feature 50.143 Connector, 2-pole (N/L)
50.32 Torsion safety feature 50.144 Connector, 3-pole (0V / L
↓
/ L↑)
50.34 Bellow 50.145 Connector, 6-pole (63 / 64 / Yin / Yout)
50.35 Grub screw DIN ISO 4766 - M6