User guide

Page 6 0040501004 5010
Operating and installation instructions
Thrust actuator ARI-PREMIO-Plus
Four unassigned relay outputs can be optionally supplied for alarm signals and connection
to 24 V to 250 V DC/AC voltage. By using gold-plated contacts, it is possible to switch both
binary inputs with a low operational current and switching currents up to 2 A. With 250 V AC
operation, the gold plating can be burned off once without any negative effects on this
connection type.
4.3 Diagram
4.3.1 ARI-PREMIO 2,2 - 5 kN
Fig. 1
Yoke Version Column Version