User`s manual

4Ch H.264 hardware codec
-Network DVR
34
If you are using a router, please setting up DMZ and Port Forwarding instructions below.
[How to set DMZ]
- Set DMZ as per router manual, if you want to connect a DVR by using one internet line.
- Setting procedure and name of DMZ may be various from router manufacturers.
- For more detail information, please refer to router manual.
One example of how to set DMZ is shown below.
1) Access to your router. (Please refer to router manual provided by a router manufacturer.)
2) Find ‘Applications & Gaming’ and go to ‘DMZ’.
3) Click ‘Enable’ and input IP address on ‘DMZ Host IP Address’.
4) Click ‘Save Settings’ to save.
[How to do Port Forwarding]
- Set Port Forwarding as per router manual, if you want to connect to several DVRs by using one internet line.
- Setting procedure and name of Port Forwarding may be various from router manufacturers.
- For more detail information, please refer to router manual.
One example of how to do Port Forwarding is shown below.
1) Access to your router. (Please refer to router manual provided by a router manufacturer.)
2) Find ‘Applications & Gaming’ and go to ‘Port Range Forward’ on the menu.
3) Input Port number of your DVR on ‘Start’ / ‘End’ section below.
4) Input IP Address and check ‘Enable’. Then, click ‘Save Settings’ to save.
CHAP. 5 Setup