User`s manual

4Ch H.264 hardware codec
-Network DVR
IP SETUP
MAC ADDRESS
DHCP MODE
IP PORT
IP ADDRESS
GATEWAY
SUBNET
00-0A-A2-00-FD-63
MANUAL
IP DETECT
50000
192.168.001.160
192.168.001.001
255.255.255.255
ESC
(1) IP Setup :
Shows the network information assigned to
the DVR unit. If the DHCP setup status is
AUTOMATIC, you can set the IP port only.
If the DHCP setup status is MANUAL, you
must set all parameters.
If IP port number is blocked, a network
specialist’s advice is needed.
A. Static IP
A static IP address is a number (in the form of a dotted quad) that is assigned to a computer by
an Internet service provider (ISP) to be its permanent address on the Internet.
Input IP address which is assigned by your ISP in IP CONFIG SETUP.
1) Verify if IP address is OK or not with PC before connecting DVR.
(or inquires to Internet service provider that assigned IP address, GATEWAY, SUBNET MASK)
2) Connect LAN cable to DVR after confirmation.
3) DVR : MENU → LOG IN DVR → EXTERNAL DEVICE → TCP/IP SETUP → IP SETUP .
4) Set DHCP to MANUAL.
5) Verify if MAC ADDRESS starts from 00-0A-A2….
6) Input the assigned IP address.
7) Set IP PORT. (50000 recommended)
8) Input GATEWAY (which is assigned by your ISP).
9) Input SUBNET MASK (which is assigned by your ISP).
10) Go out of MENU SETUP.
11) Turn off and on Modem (Router) which is provided by your ISP.
-> This is to reset client of MAC from your ISP.
Wait 30 seconds after turning on.
12) Access DVR with Remote Viewer Software.
See a chap.6 IRS
* If user fails to access, please verify 1,6,7,8,9,11 again.
IP SETUP
MAC ADDRESS
DHCP MODE
IP PORT
IP ADDRESS
GATEWAY
SUBNET
00-0A-A2-**-**-**
MANUAL
IP DETECT
50000
211.118.047.160
211.118.047.001
255.255.255.255
ESC
Assigned by your Internet Service Provider
PC
Internet (Static IP)
DVR
(Server)
ISP
CHAP. 5 Setup
31