User`s manual

4Ch H.264 hardware codec
-Network DVR
19
4-8. PAN/TILT/ZOOM Camera Operation
CHAP. 4 Operation
Click [PTZ] icon in the icon bar, then you can see ‘arrow’ keys & ‘+/-’ key shown below.
Click these arrow keys to move a PTZ camera to each direction. By using ‘+/-’ key, you can
control ZOON IN/OUT function. (‘+’ : ZOOM IN / ‘-” : ZOOM OUT)
4-9. Data Backup
DVR LOG-IN
USER ID ADMIN
USER PW ________
1 2 3 4 5 6 7 8 9
ENTER EXIT
(1) Please refer to 4-1. System Log in again.
Then, click ‘ENTER’.
Right-click to see the icon bar and click [MENU] icon and go to ‘Backup’.
MAIN MENU
DISPLAY SETUP
RECORD
CONFIGURATION
EXTERNAL DEVICE
BACK-UP
FIRMWARE UPGRADE
FACTORY DEFAULT
LANGUAGE ENGLISH
EXIT
(2) Click ‘BACK-UP’.
USB SETUP
HDD
START JUN/14/2007 16:19:08
END JUN/14/2007 16:36:21
MEDIA
PARTITION
START / / : :
END
SIZE MB Æ MB
CHECK USB BACK-UP ESC
(3) Insert USB memory stick and click ‘CHECK USB’.
※ The START & END time / date in HDD sub-menu only shows start and end of recording.
This is not selectable and editable.
※ Only USB memory stick should be used for backup.