Quick Start Guide

page 41
Selection of wire pair
Appears 2x, once for
measuring Resistance and
once for Capacitance.
T-R-G Measurement
Tip-Ring-Ground measurements of the loop resistance and loop
capacitance are available with the ARGUS 42. The results can be
used to qualify the clean access line e.g. to detect loop imbalances,
a defective insulation or short / open circuits.
To be able to perform the measurement, the line needs to be empty
(VAC & VDC = 0V). The middle soft key displays R/C in this case.
Pressing START in the next menu, selecting and confirming the wire
pair afterwards, initiates the measurement.
This screen appears twice, once for the resistance and once for the
capacitance measurement. Either one of the results is displayed in
the end.