Technical data

9 Single Tests

ARGUS 3u plus/3u NT

so no charges will be incurred.

In the Single tests menu,

< use

↓

to select > Service

test.

Enter the

Own number of the access

under test

There are PBXs that use separate call numbers for

incoming and outgoing calls.

In this case, for the Service checks, you can enter

a “remote” call number that corresponds to the

“own” number that is not stored in the ARGUS.

If the Service check should extend outside of the

local exchange, it is possible to perform the

Service check in an end-to-end mode.

In this case, you must enter the remote call number for a

second terminal device.

The ARGUS will then automatically check whether the

remote terminal can accept the call under the various

services – in other words, whether it is “compatible” with

these services.

In the test results, the second part (second +, - or *) refers to

the answer from the remote exchange.