Technical data

8 Select the Access Mode
31
ARGUS 3u plus/3u NT
8 Select the Access Mode
The Access Mode menu is
not selectable from the Main
menu.
It opens automatically once
the physical access is
selected in the Access menu.
8.1 Operation on a BRI or U-Interface access
8.1.1 TE-Simulation mode
TE automatic
On a BRI or U-interface access, the ARGUS will
automatically determined the D-channel Layer 2 mode
(PP or P-MP). If the ARGUS determines that the access
supports both modes, the following Configuration menu
will open:
Using the < ↓ >, select L2
mode
.
Confirm the selected L2
mode
The ARGUS will return
to the
Main menu.
TE P-P or TE P-MP
Afterwards, the access and the protocol stack will be
initialized in accordance with the selected setting.
The ARGUS will then jump to the Main menu.