Technical data

14 L1 status
112
ARGUS 3u plus/3u NT
14 L1 status
14.1 The L1 status of a BRI access
The ARGUS displays in TE mode the current status of Layer
1: which signal is received from the remote end (Rx) and
which signal does the ARGUS send (Tx).
Use the < ↓ > to select L1
status.
The ARGUS displays the
status of Layer 1 or of the
signal, which is currently
being sent ( Info 0 .... Info 4).
Press <NEW> to setup Layer
1 again (if necessary).