Technical data

12 Automatic Test
105
ARGUS 3u plus/3u NT
12.3 Sending the results of a tests to a PC
To visualize and archive the test results on the PC, the data
records can be transferred to the PC via the serial interface
using the included cable (labeled as PC Interface) (connect
the cable between the ARGUS “L-Test” jack ---- PC’s serial
interface).
Connect the ARGUS to your PC and start the ARGUS
WINplus program.
In the Main menu, use the
< ↓ > to select Automatic
tests.
Use the ↓ -Key to select the
record (e.g. No. 2).
Use the < ↓ > to select Test
data to PC.
Start transfer of
data to PC