Datasheet

11 ARGUS Settings - Device
124 ARGUS 141
11.2 Device Settings
The procedure for configuring a device setting will be illustrated with a single example:
"Alarm bell".
The ARGUS - Main menu 







Using the cursor keys, select a setting
(e.g. Alarm bell).

The default setting will be marked in the
display with a .


Mark the desired setting. The
selected setting will be marked blue
in the display.
Open the next higher menu without
making any changes to the
settings.
Settings Explanation
Menu language Selection of the menu language.
Default setting: depends on country
LCD lightness Setting the display contrast: The contrast can be changed in 16
steps. The contrast can be increased or decreased using the cursor
keys. The display shows a vertical arrow, which shows the current
setting on a scale from low to high contrast.
Date / time Entry of the date and time (initialisation of the internal clock) via the
keypad. Use the vertical cursor keys to scroll from line to line in the
display. The entered time will be continuously updated by the
ARGUS’s real time clock as long as the power is not interrupted. If
the ARGUS switched off without batteries, the clock will still run a
few more weeks on its own internal supply. If the backup supply is
exhausted, the time will be undefined and must be set again.
Settings
Device
The marked setting will be
activated as the default setting.
Off
Alarm bell