Datasheet

9 VoIP test
112 ARGUS 141






The ARGUS displays the destination
address stored in the VoIP profile. There
are a total of ten memory locations
available for destination addresses.


Setup connection

The ARGUS displays the "own number"
(from: 501) and the number called (to: 84).
The subscriber called has not yet accept
the call; the display shows “Connecting!”.
and the "yellow CALL symbol“.
<Log.> Display the signaling protocol:
SIP message status codes in
numerical form 
(see Appendix).
<Time> Show times
<Detail> Will only be shown when the
setting "Use registar“ is set to
"yes“ (see page 105).
Display the Registrar Details,
Status, Registrar IP etc.
Display the 
xDSL connection parameters,
trace data, bit distribution etc.
<Edit> To edit the marked memory
location: Open the marked
destination address to edit it or to
enter a new destination address
in an "empty" memory location
(see page 105).
Cancel setup
<Stat.> see above
<DSL> see above
or
<Talk>
Continuation on
next page