Datasheet

9 VoIP test
ARGUS 141 109
STUN server Use STUN Use STUN. Setting: yes or no. If there is a NAT router
between the ARGUS and the next remote end (gateway),
you must use STUN so that the ARGUS can determine
which IP address the remote will receive.
Default setting: No
STUN server STUN server: Specifies the address of a STUN server
which must be located in the same network (on the same
level) as the remote end
MOS
threshold
Entry of the MOS threshold: The MOS value (Mean Opinion Score) is an
evaluation of the quality of the speech data. The MOS quality scale
ranges from 5 (excellent) down to 1 (bad). The ARGUS will compare the
MOS value of the currently active VoIP connection to the target MOS
value and will display OK - if the current MOS value is at least as good as
the target MOS value - or FAIL - if it is not.
Range: 1.0 to 5.0
Default: 4.0
Profile
name
Enter or change the name of the edited VoIP profile