Datasheet

9 VoIP test
108 ARGUS 141
Adaptive
jitter
buffer:
Entry of the minimum (min) and maximum
(max) sizes of the jitter buffer and the initial
value (init).
Range: 20 to 600 ms
min: 60ms

init: 60ms 
max:120ms
Codecs Preparation of a list of voice codecs to be used. If there
are multiple codecs in the list, the priority is determined
by the order in the list.
Switch between softkey sets
<
>
The marked codec will be moved down one
place in the list.
<
>
The marked codec will be moved up one
place in the list.
<Insert> A display of the still available voice codecs
will open. If a voice codec is marked with a
in this list (Codec Selection list), it will
be added to the Codec Priority list (in the
active list of voice codecs)
<Del.> Delete the marked codec from the list
Accept the codec priorities
DTMF
settings
DTMF is a Dual-Tone Multi-Frequency dialing procedure.
Mode: DTMF mode settings
Choose one of the following settings automatic, SIP Info,
RFC 2833 or inband.
Default setting: automatic

Duration: The VoIP DTMF Time setting
Range: 40 to 1000 ms
Up to 200 ms in increments of 10, 200 to 300 ms in
increments of 20, 300 to 1000 ms in increments of 100. 
Default setting: 80 ms

Increase or decrease VoIP DTMF time.