Operation Manual

6 Start-Up
A
RGUS 126 23
6 Start-Up
Using the included cable connect the ARGUS to the access to be tested and then switch
the ARGUS on by pressing the -key.
The ARGUS displays the access and mode parameters which were last selected. In
addition, the state of the accumulator charge is displayed if it is not connected to the plug-in
power supply.
Level of accumulators' charge
Current assignment of the
softkeys
Activation of the displayed parameter. The
ARGUS starts the initialization phase and
then shows the status display (see
The displayed parameters will not be accepted. The
Access menu will now open (see page 32):
Type of access
Marked
access type
Name of the menu
Operating mode
Using the cursor keys,
you can scroll down.
Press
The ARGUS will set the type of access to the one marked with the
. The Access mode menu will open.
Press
Return to the previous display without changing to marked type of
access