User's Manual

WMM
This page allows users to activate the WMM function for this device. Please note that this
function only works while connecting to a WMM compatible device.
Items Information
WMM Enable Enable Wi-Fi Multi-Media.
WMM - Power Save Enable Enable WMM Power Save. Please enable WMM before configuring
this function.
Direct Link Setup Enable Enable DLS (Direct Link Setup). Please enable WMM before
configuring this function.
MAC Address Fill in the blanks of Direct Link with MAC Address of STA.
Timeout Value Time of
automatically disconnect after some seconds. The value is
integer. The integer must be between 0~65535. It represents that
it always connects if the value is zero. Default value of Timeout
Value is 60 seconds.
Apply / Tear Down After fill in the "MAC Address" and "Timeout Value", click "Apply"
button to save your configuration. The result will appear in the
blanks. To remove the configuration, please select the
configuration in the blanks and then click "Tear Down" button.