User's Manual

Advanced
This page provides advanced configurations to this adapter. Please refer to the following chart
for definitions of each item.
Items Information
Wireless mode Click the drop list to select a wireless mode.
Enable TX Burst Select to enable connecting to a TX Burst supported device.
Enable TCP Window Size Mark the checkbox to enable TCP window size, which help enhance
throughput.
Fast Roaming at __ dBm Mark the checkbox to enable fast r
oaming. Specify the transmit power for
fast roaming.
Show Authentication Status
Dialog
Mark the checkbox to show “Authentication Status Dialog” while
connecting to an AP with authentication. Authentication Status Dialog
displays the process about 802.1 x authentications.
TX Rate Manually select the transfer rate. The default setting is auto. (802.11n
wireless cards do not allow the user to select the TX Rate.)
Select Your Country Region
Code
Eight countries to choose. Channel list:
Classification Range
0: FCC (Canada) CH1 ~ CH11
1: ETSI CH1 ~ CH13
2: SPAIN CH10 ~ CH11
3: FRANCE CH10 ~ CH13
4: MKK CH14 ~ CH14
5: MKKI (TELEC) CH1 ~ CH14
6: ISRAEL CH3 ~ CH9
7: ISRAEL CH5 ~ CH13
Note: The country code selection is for non-US model only and is not available to all US model.
Per FCC regulation, all WiFi product marketed in US must fixed to US operation channels only.